MIL-PRF-3098/134E
REQUIREMENTS:
Dimensions, marking, and configuration: See figure 1.
Frequency range: 10.0 MHz to 30.0 MHz, inclusive.
Frequency tolerance :
Operating temperature: ±10 ppm.
Equivalent resistance: 10 ohms, maximum.
Mode of oscillation: Fundamental.
Temperature range:
Operable: 0°C to +60°C, inclusive.
Operating: -55°C to +105°C, inclusive.
Rated drive level: 1.0 mW, maximum.
Antiresonance load capacitance: 20.0 pF ±0.1 pF.
C1=24 pF ±10 percent.
C0/C1 ratio: 245 ±20 percent.
ĆF
: ≤3 ppm over the temperature range 0°C to +60°C, when measured at series
Frequency stability
F
resonance.
Shock (specified pulse): 1/
Frequency change permitted: ±5 ppm.
Equivalent resistance change permitted: ±10 percent.
Vibration: Method 201, MIL-STD-202.
Frequency change permitted: ±5 ppm.
Equivalent resistance change permitted: ±10 percent.
Thermal shock:
Frequency change permitted: ±5 ppm.
Equivalent resistance change permitted: ±10 percent.
Aging:
Frequency change permitted: ±5 ppm.
VERIFICATION:
Qualification inspection: Not applicable for this specification.
Conformance inspection: Group A tests of MIL-PRF-3098 shall be applicable.
1/ Method 213, MIL-STD-202, test condition E, except duration shall be 11 milliseconds. Measurements
before and after test. Frequency measured at +40°C ±1°C; and equivalent resonant resistance
measured at 27°C ±1°C.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business