MIL-PRF-3098/24F
REQUIREMENTS:
Dimensions, marking, and configuration: See figure 1.
Frequency range: 455 kHz.
Capacitance, shunt: 5.0 pF ±2.5 pF.
Mode of oscillation: Fundamental.
Rated drive level: 1.0 mW, maximum.
Resonance: Series.
Calibration values:
Equivalent resistance: 2,300 ohms.
Resistor voltage drop: 2.14 volts.
Operating temperature range (noncontrolled): -40°C to +70°C, inclusive.
Frequency tolerance: ±200 parts per million (ppm). There shall be a difference in frequency of 80 Hz
±12 Hz between operation at series resonance and operation at antiresonance into load capacitance of
32.0 pF ±0.5 pF. Both measurements for this purpose shall be made at room temperature.
Equivalent resistance: 3,300 ohms, maximum.
Shock (specified pulse):
Frequency change permitted: ± 30 ppm.
Equivalent resistance change permitted: ±15 percent.
Vibration: Method 201 of MIL-STD-202, amplitude .015 inch (0.38 mm) (.030 inch (0.76 mm) total
excursion).
Frequency change permitted: ±30 ppm.
Equivalent resistance change permitted: ±15 percent.
Temperature run:
Frequency change permitted: ±10 ppm.
Equivalent resistance change permitted: ±15 percent.
Bond strength: 500 grams, minimum.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business